Learn how to apply wallpaper yourself and make your home more beautiful without having to spend on labor.
Over time, every home needs maintenance to keep things running normally.
However, it is also normal to want to make changes to the rooms of the house to give the place a new, cared-for feel.
Therefore, some people change their furniture or even buy new ones, they also change the details in the decoration, or the color of the walls.
But to change the color of your wall, you don't need to actually paint it, and spend money on paint and other painting items.
You can choose apply wallpaper in place, because when you want to change the environment again, you will just need to remove the paper.
Furthermore, you have thousands of options to choose from, with the most varied types of designs and colors, which will make your home more beautiful.
If you want to learn how to apply wallpaper in your home, see this article until the end.
What will you need
First of all, you need to prepare some items that you will need when installing your wallpaper.
So you will need universal glue, which is specific for gluing the wallpaper, using scissors and a utility knife to cut the paper.
In addition to a sponge, a large steel ruler if possible, you will also need a tape measure to make the markings.
And also a bucket to mix the glue, a brush, brush or roller to apply it, a smooth spatula, a brush, a roller and a ladder.
Finally, you will of course need the wallpaper rolls, but an important tip is that all roles are from the same batch.
This is because if it is from different batches, there may be differences in tone even though it is the same color and from the same manufacturer.
And so that you don't run out of material, check the wall measurements and the calculation in the store when you buy.
Without these materials there is no how to apply wallpaper, but they all don't cost much and you should have some at home.
How to Prepare the Wall
Secondly, it is also important to see the condition of the wall that will receive the paper.
To have how to apply wallpaper and it lasts longer, you need to make sure there are no damp spots on the wall.
Furthermore, if you have old paper, remove it before applying. If it is painting, use sandpaper to improve the adhesion of the paper.
Clean the entire wall so that there is no dust, glue or grease, and if necessary, repair holes or cracks before applying.
And if the wall you are going to apply the paper to is new and unpainted, it is recommended to apply a primer.
Finally, don't forget to remove the socket plates, nails and screws from the wall.
NEWS
How to prepare the materials
Once everything is prepared, it's time to start preparing the materials for application.
Start by preparing the glue, dissolve the contents in the amount of water shown on the package packaging.
You need to mix until the liquid is the same throughout, then let it sit for about 2 hours.
After you do this, mark the width of the strip on the wall, and start in the corner, and continue across the entire wall.
However, to have how to apply wallpaper With drawings, you need to remember to line up the stripes with the drawings.
How to apply the strip
So the time has come to finally see how to apply wallpaper on site.
You place the first strip in the corner, and start gluing it from top to bottom, always respecting the width marking you made.
An important tip to ensure that the strips are aligned is to make these markings with a plumb line, like the one a bricklayer uses on construction work.
Then, using a spatula or brush, smooth the paper from the middle to the sides to remove any creases, and then cut off any excess.
Place the next strip, following the markings, and where the strips meet, use a roller and remove the excess glue with the sponge.
Finally, cut out the spaces for switches and sockets.
I'm sure that with this step by step, you know how to apply wallpaper and make your home even more beautiful.
And to help choose the ideal wallpaper, see the tips from Prime Incorporações.
